Showing 61–68 of 68 results

Show sidebar
Close

Selector switches

The Ex e Selector switches XBW4B-D/J/G, XBW5A-D/J/G are part of control and signalling units HarmAtex, they are dedicated to industries where an explosive atmosphere is present. They are suitable for demanding applications such as saline environments. They are used in an enclosure Ex e, Ex p or Ex t. Two offers: XBW4B-D/J/G... Metal bezel XBW5A-D/J/G... Plastic bezel. Mounting Panel cut-out Ø 22,5 mm. Up to 6 contacts block per actuator
Close

SL 125 in stainless steel

SL-125 combined status lights in stainless steel. This set of signalisation is certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It is design for corrosive environments and hazardous areas. The set is provided with 5 beacons maximum. The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers.Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacons can be triggered either jointly or independently. Possibility to pilot all, or separately the beacons via a telephone line. If protected by a paint UV resistant, the lens is made with borosilicate glass. Beacon and mounting plate are in stainless steel 316 L body is covered with paint UV resistant, the lens is made with borosilicate glass. On demand one of the beacons can be replaced by a push button or a junction boxe
Close

SL 150 in GRP

SL 150 combined status lights in GRP. This set of signalisation is certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It is design for corrosive environments and hazardous areas. The set is provided with 5 beacons maximum. The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers.Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacons can be triggered either jointly or independently. Possibility to pilot all, or separately the beacons via a telephone line. Body in GRP UV resistant, mounting plate in stainless steel 316L, the lens is made with borosilicate glass.
Close

TNAML

TNAML range is 100% encapsulated, maintenance free design requiring only visual inspection to IEC/EN 60079-17. With 10 years operational warranty assures favourable total cost of ownership.  Fully recyclable, environmental friendly product with an High light output efficiency (>80%) - Less luminaries required for same lighting level. Two version standard or emergency light version, emergency light by LEDs. Optional battery powered, 90/180 minutes. Self- cleaning glass and no condensation. Different type of mounting are possible, pole, ceiling and suspended mounting with adapted brackets.
Close

TRCG Brass Cable Gland

TRCG series Nickel-plated brass cable gland with metric threads for use in Ex e enclosure, with high IP rating.
Close

TRCG plugs

TRCG series Polyamid or Nickel-plated brass plugs with metric threads for use with increased safety Ex e enclosure. for use in Ex e enclosure, with high IP rating.
Close

TRCG polyamid Cable Gland

TRCG series in polyamide cable gland with metric threads for use in Ex e enclosure, with high IP rating.
Close

Control Unit ELB F-135

The ELB F-351 electronic purge controller is for use with Ex-tech solution TNAP Ex p pressurized system