Showing 49–60 of 68 results

Show sidebar
Close

PB 150 in GRP

CP 150  Manual Call point "push button" type is a product certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The apparatus is compatible with PLC, ESD, DCS systems via output 4-20 mA.There are two versions, push button and push button with key (provided). The visualisation functions, line detection, and lift flap protection, are optional. Body is in GRP, dyed in the mass and protected by a paint UV resistant.
Close

Pull wire switches

The XY2WCE tripwire emergency stop is located above or close to the conveyor. In the event of a mechanical problem or overloading on the belt, the tripwire mechanism will stop the belt to stop.
Close

Push buttons HarmAtex

The Ex e Push button XBW4B / XBW5A  are part of control and signalling units HarmAtex, they are dedicated to industries where an explosive atmosphere is present. They are suitable for demanding applications such as saline environments. They are used in an enclosure Ex e, Ex p or Ex t. Two offers: XBW4B... metal bezel XBW5A... plastic bezel Six colours are available white, black, green, yellow and bleu . Flush or projecting actuator Mounting Panel cut-out Ø 22,5 mm. Up to 6 contacts block per actuator
Close

SB 100 combined set sounder & beacons

This set of signalisation is  for indoor and outdoor NON ATEX areas and more specifically design for harsh environments, extended IP and IK level*,  it fully meets the requirements of standard IEC 60947 et EN 54 standards. The set is provided with a sounder and 4 beacons maximum The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The sounder according to user control system can be set with one tone  among 59 prerecorded tones. The beacons can be triggered either joint or independent. Optional it is possible to pilot all, or separately the beacons via a telephone line. Body are moulded with flame retardant polycarbonate,  lens is in ABS On demand one of the beacons can be replaced by a push button or a junction box. The set is assembled on a stainless steel 316 L frame
Close

SB 100-1 sounder & beacon

SB100-1 This combined set with one sounder and one beacon is  for indoor and outdoor NON ATEX areas, and more specifically design for harsh environments, extended IP and IK level*, it fully meets the requirements of standard IEC 60947 et EN 54 standards. The beacons is proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacon can be triggered joint or separatly. The sounder according to user control system can be set with one tone  among 59 prerecorded tones. Body is moulded with a flame retardant polycarbonate,  lens is in ABS Optionally control of the sounder or the beacon via a telephone line.
Close

SB 125-1 in stainless steel

SB125-1 in stainless steel. This combined product is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources: LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. It is possible to control the beacon and the sounder or separately via a telephone line. Housing and bracket are made of stainless steel 316L, body covered with UV resistant paint.
Close

SB 125-2/3/4j, stainless steel

This combined is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources; LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. Optional it is possible to control the beacon and the sounder or separately via a telephone line. Possibilty to mix functions as manual call point, push button, junction box... Housing and mounting plate are made of stainless steel 316L .
Close

SB 150-1 in GRP

SB 150-1 in UV resistant GRP. This combined product is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources; LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. It is possible to control the beacon and the sounder or separately via a telephone line. Housing in Glass-Reinforced Polyester (GRP), dyed in the mass .
Close

SB 150-2/3/4 in GRP

SB 150-2,3,4 GRP This combined status light and sounder is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources; LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. Optional it is possible to control the beacon and the sounder or separately via a telephone line. Possibilty to mix functions as manual call point, push button, junction box... Housing in GRP and mounting plate is made of stainless steel 316L .
Close

SD 100 Sounder – Horn

This sounder is  for indoor and outdoor NON ATEX areas, and specifically design for harsh environments, extended IP,  it fully comply to  the requirements of  IEC 60947 et EN 54 standards. The sounder according to user control system can be set with one tone  among 59 prerecorded tones.  It is possible to pilot the sounder via a telephone line (optional) Body moulded with a flame retardant polycarbonate, bracket in stainless steel. A complete range of accessories is available to customize product.
Close

SD 150-1 in GRP

SD150-1 Sounder - Horn in GRP  this sounder is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. Built in: possibility to select externally (by free voltage switches) 3 tones among the 59 proposed. Pausing of the signal can be done by an external switch . It is possible to control the sounder via a telephone line. Housing is moulded in Glass Reinforced Polyester (GRP) dyed in the mass, bracket is made of stainless steel.
Close

SD125-1 stainless steel

SD125-1 Sounder- Horn in stainless steel  this sounder is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. Built in: possibility to select externally (by free voltage switches) 3 tones among the 59 proposed. Pausing of the signal can be done by an external switch . It is possible to control the sounder via a telephone line. Housing and bracket is made of stainless steel 316L covered with UV resistant paint.