Showing 10–18 of 68 results

Show sidebar
Close

Ex-certified wireless sensors

Ex-tech has together with Disruptive Technologies (DT) developed their cutting edge micro sensor for hazardous area, allowing customers to capitalize on data acquisition in their maintenance planning and operational excellence.
This means the Industry Hydrogen, O&G, Petrochemicals, Pharmacy etc. remotely can operate, monitor and control their installations onshore and offshore to a fraction of the cost, reducing manual work, prevent incidents and gain new and important insight – that benefits business, employees and environment.
Close

IIC DE8WH – Carbon Steel

The rugged DE8WH triple-pole motor starters Ex d in carbon steel with thermal overload relay are ideally suited for many applications. The range is available in three versions: • with thermal overload relay, without isolator, without fuses • with thermal overload relay, without isolator, with fuses • with thermal overload relay, with isolator, with fuses A wide range of enclosures associated to a wide range of thermal overload relays, disconnecting switches with or without fuses, allows a customization of starters for various applications.
Close

PB 125 in stainless steel

PB 125 This Manual Call point "push button" type is a product certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The apparatus is compatible with PLC, ESD, DCS systems via output 4-20 mA.  There are two versions, push button and push button with key (provided). The visualisation functions, line detection, and lift flap protection, are optional. Made in 316 L stainless steel covered  by a paint UV resistant
Close

Pull wire switches

The XY2WCE tripwire emergency stop is located above or close to the conveyor. In the event of a mechanical problem or overloading on the belt, the tripwire mechanism will stop the belt to stop.
Close

SB 125-1 in stainless steel

SB125-1 in stainless steel. This combined product is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources: LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. It is possible to control the beacon and the sounder or separately via a telephone line. Housing and bracket are made of stainless steel 316L, body covered with UV resistant paint.
Close

SD 150-1 in GRP

SD150-1 Sounder - Horn in GRP  this sounder is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. Built in: possibility to select externally (by free voltage switches) 3 tones among the 59 proposed. Pausing of the signal can be done by an external switch . It is possible to control the sounder via a telephone line. Housing is moulded in Glass Reinforced Polyester (GRP) dyed in the mass, bracket is made of stainless steel.
Close

SL 125 in stainless steel

SL-125 combined status lights in stainless steel. This set of signalisation is certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It is design for corrosive environments and hazardous areas. The set is provided with 5 beacons maximum. The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers.Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacons can be triggered either jointly or independently. Possibility to pilot all, or separately the beacons via a telephone line. If protected by a paint UV resistant, the lens is made with borosilicate glass. Beacon and mounting plate are in stainless steel 316 L body is covered with paint UV resistant, the lens is made with borosilicate glass. On demand one of the beacons can be replaced by a push button or a junction boxe
Close

TNAML

TNAML range is 100% encapsulated, maintenance free design requiring only visual inspection to IEC/EN 60079-17. With 10 years operational warranty assures favourable total cost of ownership.  Fully recyclable, environmental friendly product with an High light output efficiency (>80%) - Less luminaries required for same lighting level. Two version standard or emergency light version, emergency light by LEDs. Optional battery powered, 90/180 minutes. Self- cleaning glass and no condensation. Different type of mounting are possible, pole, ceiling and suspended mounting with adapted brackets.
Close

TRCG polyamid Cable Gland

TRCG series in polyamide cable gland with metric threads for use in Ex e enclosure, with high IP rating.