Showing 1–9 of 68 results

Show sidebar
Close

23CC Series

The 23CC series (For T8 lamps , 23CC5 / 2x18W and 23CC6 / 2x36W) of fluorescent luminaries is a corrosion resistant IP66 luminaries built for easy installation and maintenance. The emergency version (Emergency version T8 lamps, 23CC5-., 2x18W and 23CC6-., 2x36W) has an incorporated inverter which is powered by the internal battery during main power failure. The inverter control and secure the status of the batteries, more than 120 min emergency light can be obtained during power failure. 3 LED ́s gives the status of the emergency system. Mounting on Ceiling , chain, pendant, wall and clamp, Platform fence, platform flange, street lamp.
Close

AC-DC LED pilot Lights

The Ex e AC-DC LED pilot lights XLW4BV / XLW5AV are part of control and signalling units HarmAtex, they are dedicated to industries where an explosive atmosphere is present. They are suitable for demanding applications such as saline environments. They are used in an enclosure Ex e, Ex p or Ex t. Two offers: XLW4BV... metal bezel XLW5AV... plastic bezel 5 colours available white, bleu, red, green and yellow. Mounting Panel cut-out Ø 22,5 mm.

Close

BC 100 beacons – status lights

This BC100 beacon is  for indoor and outdoor NON ATEX areas, and specifically design for harsh environments, extended IP,  it fully comply to  the requirements of  IEC 60947 standards. This set is proposed for status lights. This beacon is proposed with two lighting technology. Led with steady , rotary, fixed or blinking the led have different powers rating. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. Optional it is possible to pilot the beacon via a telephone line. Body moulded with a flame retardant polycarbonate,  lens is in ABS.
Close

BC 125 in stainless steel

BC 125 Ex Beacon - status Light. This beacon is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC125 can also be used as status light. This beacon can be delivered with two different light sources:  LED  with steady, rotary, fixed or blinking LED of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: for LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally. Optional it is possible to control the beacon via a telephone line. Housing in stainless steel 316L covered with UV resistant paint, the lens in borosilicate glass.
Close

BC 150 in GRP

BC 150 Ex beacon - status light. This beacon is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC150 can also be used as status light. This beacon can be delivered with two different light sources:  Led with steady, rotary, fixed or blinking led of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally. Optional it is possible to control the beacon via a telephone line. Housing is in GRP, the lens is  in borosilicate glass.
Close

Conversion of machines

In our modern workshop, detail design and solutions as described in 2D and 3D drawings from either the clients or our own engineers, are translated into functions being in full compliance with the instructions and requirements as specified. Our panel builders broad experience for applications and tailor made solutions within all protection methods results in safe deliveries, always in accordance with stated demands and quality standards. For product request please contact; post@ex-tech.no
Close

CP 125 in stainless steel

CP 125 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional. Body in  stainless steel 316L covered  by a paint UV resistant.
Close

CP 135 in GRP

CP 135 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in. Visualisation functions, line detection, and glass protection, hammer, are optional. Body is in  GRP UV resistant. Can be used as an Ex Manual Call Point for Fire Alarm System with an addressable module fixed. inside
Close

CP 150 in GRP

CP 150 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional. Body in GRP UV resistant.