Showing 1–36 of 68 results

Show sidebar
Close

BC 125 in stainless steel

BC 125 Ex Beacon - status Light. This beacon is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC125 can also be used as status light. This beacon can be delivered with two different light sources:  LED  with steady, rotary, fixed or blinking LED of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: for LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally. Optional it is possible to control the beacon via a telephone line. Housing in stainless steel 316L covered with UV resistant paint, the lens in borosilicate glass.
Close

Control Unit ELB F-135

The ELB F-351 electronic purge controller is for use with Ex-tech solution TNAP Ex p pressurized system
Close

Conversion of machines

In our modern workshop, detail design and solutions as described in 2D and 3D drawings from either the clients or our own engineers, are translated into functions being in full compliance with the instructions and requirements as specified. Our panel builders broad experience for applications and tailor made solutions within all protection methods results in safe deliveries, always in accordance with stated demands and quality standards. For product request please contact; post@ex-tech.no
Close

CP 125 in stainless steel

CP 125 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional. Body in  stainless steel 316L covered  by a paint UV resistant.
Close

Ex d e IIC Pressure switches XML

The XML range of pressure switches is designed for applications where it is important to control fluids in your installation from 0.1 to 500 bars. With an extensive range for pressures and fluids, XMLWC gives you control in the hazardous area.
Close

Ex d IIC Limit switches XCWD compact

The limit switches XCWD, designed for intensive use, have: • 2 or 4 electrically separate snap action contacts • heads that can be adjusted from 15° to 15° on 360° relative    to the body • a wide choice of actuators, 4 cable lengths • distance of fixing holes identical to the previous range XCWA, they can easily substitute.
Close

Ex d IIC Photocells XUWB

With a footprint of only 30 mm in diameter, this prewired photo-electric sensor XUWB ATEX certified Ex d, can be used in all types of applications. With a nominal range from 0.6 m to 15 m, it will be able to meet all your need's
Close

Ex e DE1GW in Carbon or stainless steel

The junction boxes DEIGW Increased safety - Group IIC - Painted steel or stainless steel AISI 316L These junction boxes series are ideal for environments in the presence of chemical agents, corrosion resistant and suitable for very high and very low ambient temperatures. The maximum number of terminals depends of terminals section, operating temperature and required temperature class. They are equipped with a mounting plate and the fixing brackets. They can also be equipped with push buttons, selector switches, pilot lights, measurement instruments and are available in other sizes.
Close

Ex e XAWG in GRP

The control stations XAWG, made in glass-reinforced polyester (GRP), are equipped with our extensive range of robust and flexible control and signalling units HarmAtex, They combine the functions start and stop for motors, fans, pumps ..., and they can be provided with measuring instruments for current control, voltage or other physical quantities. The functions can be predefined or determined according to the requirement of the application. Up to 48 control and signalling units can be installed on the XAWG control units. They are also available empty for making junction boxes For product request please contact: sales.solution@ex-tech.no
Close

Ex-certified wireless sensors

Ex-tech has together with Disruptive Technologies (DT) developed their cutting edge micro sensor for hazardous area, allowing customers to capitalize on data acquisition in their maintenance planning and operational excellence.
This means the Industry Hydrogen, O&G, Petrochemicals, Pharmacy etc. remotely can operate, monitor and control their installations onshore and offshore to a fraction of the cost, reducing manual work, prevent incidents and gain new and important insight – that benefits business, employees and environment.
Close

IIC DE8WH – Painted Carbon Steel or Stainless Steel Motor Starters

The rugged DE8WH triple-pole motor starters Ex d in carbon steel with thermal overload relay are ideally suited for many applications. The range is available in three versions: • with thermal overload relay, without isolator, without fuses • with thermal overload relay, without isolator, with fuses • with thermal overload relay, with isolator, with fuses A wide range of enclosures associated to a wide range of thermal overload relays, disconnecting switches with or without fuses, allows a customization of starters for various applications.
Close

PB 125 in stainless steel

PB 125 This Manual Call point "push button" type is a product certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The apparatus is compatible with PLC, ESD, DCS systems via output 4-20 mA.  There are two versions, push button and push button with key (provided). The visualisation functions, line detection, and lift flap protection, are optional. Made in 316 L stainless steel covered  by a paint UV resistant
Close

Pull wire switches

The XY2WCE tripwire emergency stop is located above or close to the conveyor. In the event of a mechanical problem or overloading on the belt, the tripwire mechanism will stop the belt to stop.
Close

SB 125-1 in stainless steel

SB125-1 in stainless steel. This combined product is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources: LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. It is possible to control the beacon and the sounder or separately via a telephone line. Housing and bracket are made of stainless steel 316L, body covered with UV resistant paint.
Close

SD 150-1 in GRP

SD150-1 Sounder - Horn in GRP  this sounder is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. Built in: possibility to select externally (by free voltage switches) 3 tones among the 59 proposed. Pausing of the signal can be done by an external switch . It is possible to control the sounder via a telephone line. Housing is moulded in Glass Reinforced Polyester (GRP) dyed in the mass, bracket is made of stainless steel.
Close

SL 125 in stainless steel

SL-125 combined status lights in stainless steel. This set of signalisation is certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It is design for corrosive environments and hazardous areas. The set is provided with 5 beacons maximum. The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers.Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacons can be triggered either jointly or independently. Possibility to pilot all, or separately the beacons via a telephone line. If protected by a paint UV resistant, the lens is made with borosilicate glass. Beacon and mounting plate are in stainless steel 316 L body is covered with paint UV resistant, the lens is made with borosilicate glass. On demand one of the beacons can be replaced by a push button or a junction boxe
Close

TNAML

TNAML range is 100% encapsulated, maintenance free design requiring only visual inspection to IEC/EN 60079-17. With 10 years operational warranty assures favourable total cost of ownership.  Fully recyclable, environmental friendly product with an High light output efficiency (>80%) - Less luminaries required for same lighting level. Two version standard or emergency light version, emergency light by LEDs. Optional battery powered, 90/180 minutes. Self- cleaning glass and no condensation. Different type of mounting are possible, pole, ceiling and suspended mounting with adapted brackets.
Close

TRCG polyamid Cable Gland

TRCG series in polyamide cable gland with metric threads for use in Ex e enclosure, with high IP rating.
Close

BC 150 in GRP

BC 150 Ex beacon - status light. This beacon is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC150 can also be used as status light. This beacon can be delivered with two different light sources:  Led with steady, rotary, fixed or blinking led of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally. Optional it is possible to control the beacon via a telephone line. Housing is in GRP, the lens is  in borosilicate glass.
Close

CP 135 in GRP

CP 135 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in. Visualisation functions, line detection, and glass protection, hammer, are optional. Body is in  GRP UV resistant. Can be used as an Ex Manual Call Point for Fire Alarm System with an addressable module fixed. inside
Close

Enclosure systems

Our full range of equipment and enclosure systems comprises products of superior quality, tailor made with resistant levels needed in each of the specific environments where they are meant to be installed. We can thus deliver exactly according to the customers demands and specifications. Always. Welded  or cast alloy, stainless acid resistant steel, aluminium, black steel and GRP are included in our comprehensive range of equipment and enclosures. These include Ex e, Ex d, Ex i, Ex p and Ex m. And combinations of these protection methods. Applications includes all gas groups  (IIA, IIB and IIC). The specific products included in equipment and enclosures are junction boxes, panels, explosion proof enclosures and pressurised systems. For product request please contact; post@ex-tech.no
Close

Ex d e IIC Limit switches XCK & XCR

The limit switches XCK and XCR ranges of limit switches are based on Télémecanique sensors series of operator heads and bodies and is equipped with Ex ed Ex-tech (Ex-tech solution) contact block suitable for Zone 1 use. The products are well known around the world for their reliability, design and flexibility of application. The XCKW series are supplied with fitted cable gland for easy installation. XCKWMR are fitted for lifting Equipment, conveyors, handling devices. XCRA / B / TW are fitted for lifting Equipment, conveyors.
Close

Ex e DE1GU Safety switches in GRP

Increased safety - Group IIC  safety switches  DE1G series are made of polyester (GRP) or in stainless steel AISI 316L. They provide isolation during maintenance or repair of machines in every industrial application in hazardous areas.
Close

Ex e TNAE in Stainless Steel

The TNAE range in 316 stainless steel Ex e enclosures are designed for use in any environment where an explosive atmosphere may be present and are especially recommended for chemical agent environments, seawater corrosion resistance and extremes of low and high temperature. The maximum number of terminals depends of terminals section, operating temperature and required temperature class. They can also be equipped with push buttons, selector switches, pilot lights, measurement instruments.
Close

Ex e XAWF in aluminium

The control stations XAWF, made in aluminium, are equipped with our extensive range of robust and flexible control and signalling units HarmAtex, They combine the functions start and stop for motors, fans, pumps ..., and they can be provided with measuring instruments for current control, voltage or other physical quantities. The functions can be predefined or determined according to the requirement of the application. Up to 52 control and signalling units can be installed on the XAWF control units.
Close

Ex e XAWG in GRP

The junction box XAWG range Ex e in glass-fiber reinforced polyester enclosures are designed for use in any environment where an explosive atmosphere may be present and are suitable for chemical agent environments, seawater corrosion resistance and extremes of low and high temperature. The maximum number of terminals depends of terminals section, operating temperature and required temperature class. They can also be equipped with push buttons, selector switches, pilot lights, measurement instruments.
Close

PB 135 in GRP

PB135  Manual Call point "push button" type is a product certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The apparatus is compatible with PLC, ESD, DCS systems via output 4-20 mA.There are two versions, push button and push button with key (provided). The visualisation functions, line detection, and lift flap protection, are optional. Body is in GRP, dyed in the mass and protected by a paint UV resistant.
Close

Push buttons HarmAtex – Ex e

The Ex e Push button XBW4B / XBW5A  are part of control and signalling units HarmAtex, they are dedicated to industries where an explosive atmosphere is present. They are suitable for demanding applications such as saline environments. They are used in an enclosure Ex e, Ex p or Ex t. Two offers: XBW4B... metal bezel XBW5A... plastic bezel Six colours are available white, black, green, red, yellow and blue. Flush or projecting actuator Mounting Panel cut-out Ø 22,5 mm. Up to 6 contact blocks per actuator
Close

SB 150-1 in GRP

SB 150-1 in UV resistant GRP. This combined product is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources; LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. It is possible to control the beacon and the sounder or separately via a telephone line. Housing in Glass-Reinforced Polyester (GRP), dyed in the mass .
Close

SD125-1 stainless steel

SD125-1 Sounder- Horn in stainless steel  this sounder is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. Built in: possibility to select externally (by free voltage switches) 3 tones among the 59 proposed. Pausing of the signal can be done by an external switch . It is possible to control the sounder via a telephone line. Housing and bracket is made of stainless steel 316L covered with UV resistant paint.
Close

SL 150 in GRP

SL 150 combined status lights in GRP. This set of signalisation is certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It is design for corrosive environments and hazardous areas. The set is provided with 5 beacons maximum. The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers.Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacons can be triggered either jointly or independently. Possibility to pilot all, or separately the beacons via a telephone line. Body in GRP UV resistant, mounting plate in stainless steel 316L, the lens is made with borosilicate glass.
Close

TRCG plugs

TRCG series Polyamid or Nickel-plated brass plugs with metric threads for use with increased safety Ex e enclosure. for use in Ex e enclosure, with high IP rating.
Close

BC 100 beacons – status lights

This BC100 beacon is  for indoor and outdoor NON ATEX areas, and specifically design for harsh environments, extended IP,  it fully comply to  the requirements of  IEC 60947 standards. This set is proposed for status lights. This beacon is proposed with two lighting technology. Led with steady , rotary, fixed or blinking the led have different powers rating. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. Optional it is possible to pilot the beacon via a telephone line. Body moulded with a flame retardant polycarbonate,  lens is in ABS.
Close

CP 150 in GRP

CP 150 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional. Body in GRP UV resistant.
Close

Ex d IIC Limit switches XC8 & ZC8 heavy duty

The limit switches XC8 and ZC8 ranges is a combination of different bodies and actuators. Our standard product range boasts both robust construction and cable gland entry, making the XC8 and ZC8 a safe and easy choice for a wide variety of customer applications. In addition, further head types are available for those customers who need a more specialized product.
Close

Ex e SDE1G Safety switches in Stainless steel

The Ex e safety switches SDE1G  are made of stainless steel AISI 316L . They provide isolation during maintenance or repair of machines in every industrial application in hazardous areas.