BC 125 Ex Beacon - status Light. This beacon is certified for use in Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC125 can also be used as status light. This beacon can be delivered with two different light sources: LED with steady, rotary, fixed or blinking LED of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: for LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally. Optional it is possible to control the beacon via a telephone line. Housing in stainless steel 316L covered with UV resistant paint, the lens in borosilicate glass.
In our modern workshop, detail design and solutions as described in 2D and 3D drawings from either the clients or our own engineers, are translated into functions being in full compliance with the instructions and requirements as specified. Our panel builders broad experience for applications and tailor made solutions within all protection methods results in safe deliveries, always in accordance with stated demands and quality standards. For product request please contact; firstname.lastname@example.org
CP 125 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional. Body in stainless steel 316L covered by a paint UV resistant.
The limit switches XCWD, designed for intensive use, have: • 2 or 4 electrically separate snap action contacts • heads that can be adjusted from 15° to 15° on 360° relative to the body • a wide choice of actuators, 4 cable lengths • distance of fixing holes identical to the previous range XCWA, they can easily substitute.
The junction boxes DEIGW Increased safety - Group IIC - Painted steel or stainless steel AISI 316L These junction boxes series are ideal for environments in the presence of chemical agents, corrosion resistant and suitable for very high and very low ambient temperatures. The maximum number of terminals depends of terminals section, operating temperature and required temperature class. They are equipped with a mounting plate and the fixing brackets. They can also be equipped with push buttons, selector switches, pilot lights, measurement instruments and are available in other sizes.
The control stations XAWG, made in glass-reinforced polyester (GRP), are equipped with our extensive range of robust and flexible control and signalling units HarmAtex, They combine the functions start and stop for motors, fans, pumps ..., and they can be provided with measuring instruments for current control, voltage or other physical quantities. The functions can be predefined or determined according to the requirement of the application. Up to 48 control and signalling units can be installed on the XAWG control units. They are also available empty for making junction boxes For product request please contact: email@example.com
Ex-tech has together with Disruptive Technologies (DT) developed their cutting edge micro sensor for hazardous area, allowing customers to capitalize on data acquisition in their maintenance planning and operational excellence.
This means the Industry Hydrogen, O&G, Petrochemicals, Pharmacy etc. remotely can operate, monitor and control their installations onshore and offshore to a fraction of the cost, reducing manual work, prevent incidents and gain new and important insight – that benefits business, employees and environment.
The rugged DE8WH triple-pole motor starters Ex d in carbon steel with thermal overload relay are ideally suited for many applications. The range is available in three versions: • with thermal overload relay, without isolator, without fuses • with thermal overload relay, without isolator, with fuses • with thermal overload relay, with isolator, with fuses A wide range of enclosures associated to a wide range of thermal overload relays, disconnecting switches with or without fuses, allows a customization of starters for various applications.