Best sellers
BC 150 in GRP
BC 150 Ex beacon - status light. This beacon is certified for use in Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC150 can also be used as status light. This beacon can be delivered with two different light sources: Led with steady, rotary, fixed or blinking led of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally.
Optional it is possible to control the beacon via a telephone line. Housing is in GRP, the lens is in borosilicate glass.
Conversion of machines
In our modern workshop, detail design and solutions as described in 2D and 3D drawings from either the clients or our own engineers, are translated into functions being in full compliance with the instructions and requirements as specified. Our panel builders broad experience for applications and tailor made solutions within all protection methods results in safe deliveries, always in accordance with stated demands and quality standards.
For product request please contact; post@ex-tech.no
CP 135 in GRP
CP 135 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in. Visualisation functions, line detection, and glass protection, hammer, are optional. Body is in GRP UV resistant. Can be used as an Ex Manual Call Point for Fire Alarm System with an addressable module fixed. inside
Ex d IIC Limit switches XCWD compact
The limit switches XCWD, designed for intensive use, have:
• 2 or 4 electrically separate snap action contacts
• heads that can be adjusted from 15° to 15° on 360° relative to the body
• a wide choice of actuators, 4 cable lengths
• distance of fixing holes identical to the previous range XCWA, they can easily substitute.
Ex e TNAE in Stainless Steel
The TNAE range in 316 stainless steel Ex e enclosures are designed for use in any environment where an explosive atmosphere may be present and are especially recommended for chemical agent environments, seawater corrosion resistance and extremes of low and high temperature. The maximum number of terminals depends of terminals section, operating temperature and required temperature class. They can also be equipped with push buttons, selector switches, pilot lights, measurement instruments.
Ex e XAWP pendant station in GRP
The XAWP pendant control stations range is suitable for all kinds of industry but primarily used on cranes. The XAWP range is available with 2, 4, 6 or 8 pushbuttons with up to three contact blocks per operator. Custom double XAWP assemblies can be delivered to provide 12 or 16 way pendant control stations. The XAWP also features an optional double-step actuation mode for dual speed control. Mounting Assembly of the components only by us.
IIB + H2 EJB in Copper Free Aluminium
The EJB range of Ex d IIB enclosures are manufactured copper free aluminum and designed for control, check, signal, automation, interruption and protection use. If required, several enclosures can be assembled on a frame with separate or common Ex e/i junction boxes. The enclosures can be delivered empty with U component certificate or supplied fully assembled according to customer need’s.
SD 150-1 in GRP
SD150-1 Sounder - Horn in GRP this sounder is certified for use in Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones.
Built in: possibility to select externally (by free voltage switches) 3 tones among the 59 proposed. Pausing of the signal can be done by an external switch . It is possible to control the sounder via a telephone line. Housing is moulded in Glass Reinforced Polyester (GRP) dyed in the mass, bracket is made of stainless steel.
SL 150 in GRP
SL 150 combined status lights in GRP. This set of signalisation is certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It is design for corrosive environments and hazardous areas. The set is provided with 5 beacons maximum.
The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers.Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacons can be triggered either jointly or independently. Possibility to pilot all, or separately the beacons via a telephone line.
Body in GRP UV resistant, mounting plate in stainless steel 316L, the lens is made with borosilicate glass.