Showing 1–12 of 20 results

Show sidebar
blank
Close

BC 100 beacons – status lights

This BC100 beacon is  for indoor and outdoor NON ATEX areas, and specifically design for harsh environments, extended IP,  it fully comply to  the requirements of  IEC 60947 standards. This set is proposed for status lights. This beacon is proposed with two lighting technology. Led with steady , rotary, fixed or blinking the led have different powers rating. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. Optional it is possible to pilot the beacon via a telephone line. Body moulded with a flame retardant polycarbonate,  lens is in ABS.
blank
Close

BC 125 in stainless steel

BC 125 Ex Beacon - status Light. This beacon is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC125 can also be used as status light. This beacon can be delivered with two different light sources:  LED  with steady, rotary, fixed or blinking LED of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: for LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally. Optional it is possible to control the beacon via a telephone line. Housing in stainless steel 316L covered with UV resistant paint, the lens in borosilicate glass.
blank
Close

BC 150 in GRP

BC 150 Ex beacon - status light. This beacon is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. The BC150 can also be used as status light. This beacon can be delivered with two different light sources:  Led with steady, rotary, fixed or blinking led of different powers or Flashing with XENON tube of different powers (Four flashing frequencies are selectable). Built in functions: LED type possibility to pilot externally (free voltage contact) 4 différent blinking/rotating frequencies among 36, for Xenon type 4 différent blinking frequencies among 16 can be pilot externally. Optional it is possible to control the beacon via a telephone line. Housing is in GRP, the lens is  in borosilicate glass.
blank
Close

CP 125 in stainless steel

CP 125 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional. Body in  stainless steel 316L covered  by a paint UV resistant.
blank
Close

CP 135 in GRP

CP 135 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in. Visualisation functions, line detection, and glass protection, hammer, are optional. Body is in  GRP UV resistant. Can be used as an Ex Manual Call Point for Fire Alarm System with an addressable module fixed. inside
blank
Close

CP 150 in GRP

CP 150 Manual Call point is a product certified for Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The manual call point is compatible with PLC, ESD, DCS systems via output 4-20 mA. The test function is built in, visualisation functions, line detection, and glass protection, hammer, are optional. Body in GRP UV resistant.
blank
Close

PB 125 in stainless steel

PB 125 This Manual Call point "push button" type is a product certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The apparatus is compatible with PLC, ESD, DCS systems via output 4-20 mA.  There are two versions, push button and push button with key (provided). The visualisation functions, line detection, and lift flap protection, are optional. Made in 316 L stainless steel covered  by a paint UV resistant
blank
Close

PB 135 in GRP

PB135  Manual Call point "push button" type is a product certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The apparatus is compatible with PLC, ESD, DCS systems via output 4-20 mA.There are two versions, push button and push button with key (provided). The visualisation functions, line detection, and lift flap protection, are optional. Body is in GRP, dyed in the mass and protected by a paint UV resistant.
blank
Close

PB 150 in GRP

CP 150  Manual Call point "push button" type is a product certified for Atex areas 1-2 for gas and 21 to 22 for dust. It is dedicated Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It was developed for corrosive environments and hazardous areas . The apparatus is compatible with PLC, ESD, DCS systems via output 4-20 mA.There are two versions, push button and push button with key (provided). The visualisation functions, line detection, and lift flap protection, are optional. Body is in GRP, dyed in the mass and protected by a paint UV resistant.
blank
Close

SB 100 combined set sounder & beacons

This set of signalisation is  for indoor and outdoor NON ATEX areas and more specifically design for harsh environments, extended IP and IK level*,  it fully meets the requirements of standard IEC 60947 et EN 54 standards. The set is provided with a sounder and 4 beacons maximum The beacons are proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The sounder according to user control system can be set with one tone  among 59 prerecorded tones. The beacons can be triggered either joint or independent. Optional it is possible to pilot all, or separately the beacons via a telephone line. Body are moulded with flame retardant polycarbonate,  lens is in ABS On demand one of the beacons can be replaced by a push button or a junction box. The set is assembled on a stainless steel 316 L frame
blank
Close

SB 100-1 sounder & beacon

SB100-1 This combined set with one sounder and one beacon is  for indoor and outdoor NON ATEX areas, and more specifically design for harsh environments, extended IP and IK level*, it fully meets the requirements of standard IEC 60947 et EN 54 standards. The beacons is proposed in two lighting technology. Led with steady , rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. The beacon can be triggered joint or separatly. The sounder according to user control system can be set with one tone  among 59 prerecorded tones. Body is moulded with a flame retardant polycarbonate,  lens is in ABS Optionally control of the sounder or the beacon via a telephone line.
blank
Close

SB 125-1 in stainless steel

SB125-1 in stainless steel. This combined product is certified for use in  Atex explosive atmosphere, zone 1 & 2 for gas and zone 21 & 22 for dust. It is dedicated for Oil & Gas, chemical, petrochemical, pharmacy industries, marine and Offshore applications. It’s designed for corrosive environnements and hazardous area. This sounder, according to user control system, can be set with one tone among 59 prerecorded tones. The beacon can be delivered with two different light sources: LED with steady, rotary, fixed or blinking led of different powers. Flashing with XENON tube of different powers. Four flashing frequencies are selectable. It is possible to control the beacon and the sounder or separately via a telephone line. Housing and bracket are made of stainless steel 316L, body covered with UV resistant paint.